Description
Automatic charging station ZSU-3 is designed for automatic charging of Ni-Cd, NiMH, Li-Ion, Li-polymer batteries, with nominal voltage from 2,5 to 5V used in miner’s head lamps including ones with methane alarm. ZSU-3 station can charge 54 lamps simultaneously and allows placing 54 self-rescuers for storage.
- Charge with stabilized voltage or current;
- Battery recovery from deep discharge condition;
- Additional discharge of lamp batter;
- Charge cycle (additional discharge-charge) no more than 15 hours;
- Opportunity of the accelerated charge;
- Limitation of charge level;
- Automatic switching into the mode "storage" (additional charge by low current);
- Saving all charge modes during charging station power-off;
- Availability of automatic battery cycling mode;
- Protection against short circuit of the charging cell outlet;
- Data exchange with PC via interface RS-485 under the control of the operator’s program;
Lamp-room operator’s software is working in OS MS Windows 2000(XP), and allows data collection, management and visualization from charging stations ZSU-3. The network of data collection and transmission can include up to 60 charging stations. Software collects the data to archive; the archive capacity is unspecified and only limited with data storage device capacity. On the basis of soft-and- hardware complex, ZSU-3 Lamp-room operator’s software is possible to build time accounting system.
Technical characteristics
| Maximum power consumption,kW | 1 |
|---|---|
| Power supply voltage: alternate, single-phased, 50 Hz frequency | 220В±15% |
| Lamp battery discharge current, not more than, A | 3 |
| Lamp battery charge current, not more than, A | 3 |
| Charge Voltage, V | 2,5 - 5,0 |
| Charge current setting error, not more, mA | 30 |
| Charge voltage setting error, not more, mV | 20 |
| Time of full charge, h, not more | 15 |
| Number of charge modes (battery types) | 16 |
| Stand-by during accident management, min. | 30 |
| Dimensions, mm | 1820х520х1225 |
| Weight, kg | 200 |